Product

Product Facts

Product Name
Axess Pro 3100
Availability
In Stock
Fulfillment Type
online
Brand
B&D Garage Doors
Category
Home & Garden > Garage Doors & Openers

The Axess® Pro Series 3100 range provides innovative features for the demanding world of industrial shutter and roll up door automation.

VariantPriceAvailability
AxessPro3100

Axess Pro 3100 industrial shutter opener

Bring controlled access to your industrial roller shutter with Axess Pro 3100. Choose from single-phase models and manual-console or automated Logic Console control. We’ll match the motor, gearing and safety equipment to your shutter and the way your site operates.

Get a free quoteCall 13 62 63

The quote form opens on our main B&D website.

On this page: Select the correct 3100 model · Two operating setups · Access, programming and safety · Mechanical installation and manual operation · Warranty and commercial maintenance · Let’s plan your commercial installation

Select the correct 3100 model

SpecificationAX3105AX3110
Input supply230–240 V AC, 50 Hz230–240 V AC, 50 Hz
Motor power0.5 HP1.0 HP
Maximum shutter opening area18 m²36 m²
Limit travel30.5 turns of output shaft30.5 turns of output shaft
Duty cycle60%60%
Receiver memory with Logic control511 four-button transmitter codes511 four-button transmitter codes

These are the Series 3000 manual’s single-phase 3100 models. AX3305, AX3310 and AX3315 are the separate three-phase 3300 range; their 415 V supply and larger model options should not be presented as 3100 specifications. Area limits do not replace a load, gearing and usage assessment.

Two operating setups

SetupRequired equipment and operation
Deadman setupDrive unit and Manual Console; supervised hold-to-run control as specified
Automated full-logic setupDrive unit, Logic Console, compatible transmitters and Safety Beams

The full-logic kit includes two TrioCode 128 keyring transmitters and wired Safety Beams. The Logic Console gives you an LCD menu and programmable functions. Without installed and detected beams, automatic Safety Close mode limits the available functions; your installer must commission the complete system for full automatic operation.

Access, programming and safety

Controller programming is installation work. Have the technician test every safety device and demonstrate normal operation, emergency stopping and the permitted manual procedure. Do not bypass a safety-close state to regain unattended control.

Mechanical installation and manual operation

The installation hardware includes a drive unit, communication cable, timing assembly, mounting flange, output shaft, sprocket and chain. We’ll check the mounting, ratio, shaft alignment and door balance against your shutter and support structure.

Your Axess Pro 3100 has a hand-chain arrangement. If the console shows “Drive Disengaged”, check whether the hand chain is hanging freely. Learn the manual-operation procedure for your installation and keep the chain and moving parts clear. Residential rail-opener release instructions do not apply to this system.

We’ll plan the motor and maintenance schedule around your daily and peak usage. Axess Pro 3100 has a 60% duty rating and is not intended for continuous operation.

Warranty and commercial maintenance

We size commercial systems around the opening, daily and peak operating cycles, environment, access control and safety needs. Tell us about forklifts, delivery vehicles, public access and shift patterns. Maximum area alone does not establish suitability. The door, motor, controls and protective devices must be specified as a complete installation.

Have a qualified technician set the inspection and service schedule for actual use. Keep tracks and access areas clear, check wear and damage, and stop use after an impact or a safety fault. Do not adjust springs, chain drives or electrical controls without the appropriate training.

Axess Pro 3100 has five years or 10,000 cycles of cover, whichever comes first, under our current general warranty and the linked Automatic Technology commercial handbook. Accessories and operating conditions have separate terms. We’ll confirm the warranty with your package; keep your installation and service records.

Let’s plan your commercial installation

To help us recommend a suitable setup, have these details ready:

We use this brief to specify the door, operating equipment and safety devices together. Your written quote should identify the model, controls, included accessories, installation requirements, price, lead time and applicable warranty.

Your brochures and operating guides

Find the installation drawings, full operating instructions and warranty conditions below. Choose the document that matches your model and supplied configuration, as controls and requirements can differ between generations.

Explore more on our main website

Let’s talk about your project

Tell us about your opening, operating needs and location. We’ll help you arrange a quote through our dealer network.

Get a free quoteCall 13 62 63

Images on This Page