Product

Product Facts

Product Name
Commercial Sectional Doors
Availability
In Stock
Fulfillment Type
online
Brand
B&D Garage Doors
Category
Home & Garden > Garage Doors & Openers

Ideal for carparks, shopping centres, private parking and shopfronts, a B&D sectional door is the best option for your business.

VariantPriceAvailability
BNDSectionalDoors

Toughpanel commercial sectional doors

Give your commercial opening a door built around the way you work. Our Toughpanel PTG2 combines a rigid sectional construction with track arrangements and practical glazing or insulation options. We’ll specify the door for your opening, working space and daily operating demands.

Get a free quoteCall 13 62 63

The quote form opens on our main B&D website.

On this page: Panel, frame and running gear · Door sizes and reinforcement · Windows, insulation, tapers and finish choices · Track and lifting configurations · Plan your installation space · Commercial specification, warranty and servicing · Let’s plan your commercial installation

Panel, frame and running gear

ItemPTG2 specification
Panel steel0.6 mm roll-formed COLORBOND G2NS steel
ProfileTongue-and-groove construction with five wide ribs for a shiplap-board effect
Hinges and hangersGalvanised
EdgesRolled stiles, panel edges and reinforcement reduce exposed sharp edges
Bottom railAluminium rail with weatherseal
Standard springs20,000-cycle design; higher-cycle springing optional
OperationManual or electrical
LockingNot standard; available as an option

Door sizes and reinforcement

SpecificationSize limit
Minimum height × width1,370 × 2,000 mm
Maximum height × width4,560 × 5,500 mm
Reinforcement up to 3,545 mm widthBottom panel
3,545–4,705 mm widthBottom and top panels
Over 4,705 mm widthAll panels
Double end stilesSpecified for doors over 3,985 mm high and 5,100 mm wide

We’ll check these PTG2 design limits against your final configuration, weight and support structure on the shop drawing. Some installation-table rows stop at 4,500 mm, below the product maximum of 4,560 mm, so your installer must confirm the upper-height detail.

Windows, insulation, tapers and finish choices

OptionDetails
Acrylic windows4.5 mm acrylic; 300 × 730 mm or 85 × 380 mm inserts
Ventilation windowsExpanded aluminium mesh, 300 × 730 mm
InsulationPolystyrene-filled panels with ZINCALUME or COLORBOND backing; published R-value 1.5
Fixed taper20–70 mm
Hinged taper80–560 mm
FinishExtensive COLORBOND range with woodgrain or smooth texture; confirm the current industrial colour schedule
Frequent operationOptional higher-cycle springs selected for actual use

We’ll account for insulation, windows and reinforcement when checking the finished door and motor capacity. Toughpanel PTG2 has its own construction and does not use residential Panelift specifications. Your quote will confirm the finish and colour available for your model.

Track and lifting configurations

We select the lifting system around roof geometry, clear height, services and the area that must remain free for vehicles or equipment. These are engineered alternatives, not parts to interchange after installation.

Plan your installation space

Track arrangementHeadroom and side-room guidance
Standard headroomTypically 365–390 mm according to height/width; 465–490 mm with the industrial opener in the table. Recommended side room: 100 mm each side.
Low headroomTypically 190–200 mm; 290–300 mm with the industrial opener. Recommended side room: 155 mm up to 15 m², or 195 mm over 15 m².

Use these dimensions to plan your space, then have us confirm the drawing for your height, width and equipment. Each lifting configuration needs its own installation and clear-opening check.

Commercial specification, warranty and servicing

We size commercial systems around the opening, daily and peak operating cycles, environment, access control and safety needs. Tell us about forklifts, delivery vehicles, public access and shift patterns. Maximum area alone does not establish suitability. The door, motor, controls and protective devices must be specified as a complete installation.

Have a qualified technician set the inspection and service schedule for actual use. Keep tracks and access areas clear, check wear and damage, and stop use after an impact or a safety fault. Do not adjust springs, chain drives or electrical controls without the appropriate training.

Our Toughpanel door warranty is one year. We’ll confirm the door, motor and separate component cover on your order; residential ten-year packages do not apply. The linked technical brochure dates from 2017, so your current quote and approved installation detail will confirm the final supply specification.

Let’s plan your commercial installation

To help us recommend a suitable setup, have these details ready:

We use this brief to specify the door, operating equipment and safety devices together. Your written quote should identify the model, controls, included accessories, installation requirements, price, lead time and applicable warranty.

Your brochures and operating guides

Find the installation drawings, full operating instructions and warranty conditions below. Choose the document that matches your model and supplied configuration, as controls and requirements can differ between generations.

Explore more on our main website

Let’s talk about your project

Tell us about your opening, operating needs and location. We’ll help you arrange a quote through our dealer network.

Get a free quoteCall 13 62 63

Images on This Page